Rigid backing boards for prints that need to stay flat, and hardware that lets a print hang cleanly without a traditional frame. All mounted and fitted in our shop.
3/16″ and ½″ thicknesses. A dense foam core faced with a moisture-resistant wood-fiber veneer. Much stiffer than foamcore at about the same weight, and a good choice behind larger framed pieces. Not acid-free.
3/16″, in black or white. Light and inexpensive. A polystyrene core between clay-coated paper faces. For backing artwork, mounting photo prints and everyday framing.
Two thin layers of aluminum bonded to a polyethylene core. Rigid, durable and flat; the same panel we use for metal prints.
A 5 × 5 inch aluminum block with a ½-inch standoff, fixed to the back of the panel. The print floats slightly off the wall.
A metal subframe on the back of the panel, in ½-inch or 1-inch standoff heights. Made for larger prints.
Post systems that hold the print locked in place at the corners. Available in different sizes and finishes; the selection changes, so call for current options.
4001 E. Pima Street, Tucson · Monday – Friday, 9:00 am – 6:00 pm · (520) 325-0065
